Global Exterior Insulation and Finishing System (EIFS) Market Overview : 2020-2027


Exterior insulation and finishing system (EIFS)is also known as “synthetic stucco” because of its visual resemblanceto this more traditional constructional material.The term EIFS incorporates the two main components of this covering system insulation that is attached to the exterior of the building and a finishing system is that is applied afterward.EIFS is an exterior covering for residential, commercial and institutional structures of all types and sizes in all parts of the United States.

The global exterior insulation and finishing system (EIFS) market growth is attributed to rising constructional activities, government initiatives to reduce greenhouse gases, and key player’s investments for the development of eco-friendly products. The EPIS has wide range of applications in constructions as it provides a wide range of design options including shape, color and texture. The EIFS have many advantages over masonry in traditional masonry over time water can penetrate the interior can cause damage this led to increasing demand from office buildings, restaurants, supermarkets, homes and strips malls. However, factors such as alternative such as green insulation materials may restrain the market growth.

The global Exterior Insulation and Finish System (EIFS) market is anticipated to hit xxUS$XX million by 2027. The market is showing Northward direction during the coming years and it is anticipated to set a record a CAGR of xx% during the forecast period. The report covers the in-depth analysis of market key players with their market share, primary and secondary forecast data analysis to 2027. The global Exterior Insulation and Finishing System (EIFS) market is growing in developing economies because of favorable government policies and market penetration of manufacturers, dealers, and suppliers of Exterior Insulation and Finishing System (EIFS). The rationals behind the Covid-19 impact on various regions are mentioned in the report.

Global Exterior Insulation and Finishing System (EIFS) Market Segment Analysis

Global Exterior Insulation and Finishing System (EIFS) Market

To know about the Research Methodology :- Request Free Sample Report

The EPS (expanded polystyrene) industry holds the largest market share of xx% in 2019 and is growing at a CAGR of xx% during the forecast period.

By insulation material, the EPS (expanded polystyrene) is anticipated to grow with a CAGR of xx% during the forecast period. The properties such as high insulation value, low cost and weight, high comprehensive strength and good resistance to water. These properties ofEPS (expanded polystyrene) have increased its demand in wide variety of applications such as external walls insulations, flat roof insulation, external façade insulation and floor insulations.

Scope of the report: Inquire before buying


Global Exterior Insulation and Finishing System (EIFS) Market Regional Insights:

Global Exterior Insulation and Finishing System (EIFS) Market1

Middle East & Africa is set to witness modest growth during the forecast period

The Middle East & Africa EIFS market is anticipated to be the fastest growing market with a CAGR of xx% during the forecast period. Key players are targeting this region as there is a availability of low labour cost, government favorable policies towards safety, environment, health and low exchange rates. Rising disposable income and increasing constructions activities in residential and commercial sectors has made this region as an emerging destinations for the key players operating in this market.

Europe is growth with a market share of xx% by 2019-2027

The market in Europe is expected to grow with a CAGR of xx% during the forecast period. The EU economy contributes 9% of the EU’s GDP besides, the goal of the European Commission is to help the construction sector more competitive, resource efficient and sustainable this contributed the EIFS market growth.

The EU Commission to improve design, construction, demolition and recycling of construction products, as well as simplify data in the use of resources to reduce waste have created many lucrative opportunities for the EIFS market
The objective of the report is to present a comprehensive analysis of the global Exterior Insulation and Finishing System (EIFS) market including all the stakeholders of the industry. The past and current status of the industry with forecasted market size and trends are presented in the report with the analysis of complicated data in simple language.

The report covers all the aspects of the industry with a dedicated study of key players that includes market leaders, followers, and new entrants. PORTER, SVOR, PESTEL analysis with the potential impact of micro-economic factors of the market have been presented in the report. External as well as internal factors that are supposed to affect the business positively or negatively have been analysed, which will give a clear futuristic view of the industry to the decision-makers. The report also helps in understanding global Exterior Insulation and Finishing System (EIFS) market dynamics, structure By analyzing the market segments and project global Exterior Insulation and Finishing System (EIFS) market clear representation of competitive analysis of key players By price, financial position, By detection and equipment portfolio, growth strategies, and regional presence in the global Exterior Insulation and Finishing System (EIFS) market make the report investor’s guide.

Global Exterior Insulation and Finishing System (EIFS) Market, by Component

• Adhesive
• Insulation board
• Base coat
• Other

Global Exterior Insulation and Finishing System (EIFS) Market, by Product Type

• PB (Polymer-based)
• PM (Polymer-modified)

Global Exterior Insulation and Finishing System (EIFS) Market, by End-Use

• Residential
• Non-residential

Global Exterior Insulation and Finishing System (EIFS) Market, by Insulation Material

• EPS (Expanded polystyrene)
• MW (Mineral wool)
• Other

Global Exterior Insulation and Finishing System (EIFS) Market, by Region

• Asia Pacific
• North America
• Europe
• South America
• Middle East & Africa

Global Key players operating in Global Exterior Insulation and Finishing System (EIFS) Market

• Lafargeholcim Ltd
• RMAX
• Saint-Gobain Weber
• Dryvit Systems, Inc.
• Aliva UK Ltd.
• Sto Corp.
• BASF Corporation
• Parex USA, Inc.
• The Dow Chemical Company
• Other 





Global Exterior Insulation and Finishing System (EIFS) Market

1. Preface
1.1. Report Scope and Market Segmentation
1.2. Research Highlights
1.3. Research Objectives

2. Assumptions and Research Methodology
2.1. Report Assumptions
2.2. Abbreviations
2.3. Research Methodology
2.3.1. Secondary Research
2.3.1.1. Secondary data
2.3.1.2. Secondary Sources
2.3.2. Primary Research
2.3.2.1. Data from Primary Sources
2.3.2.2. Breakdown of Primary Sources

3. Executive Summary: Exterior Insulation and Finishing System (EIFS) Market Size, By Market Value (US$ Mn)

4. Market Overview
4.1. Introduction
4.2. Market Indicator
4.2.1. Drivers
4.2.2. Restraints
4.2.3. Opportunities
4.2.4. Challenges
4.3. Porter’s Analysis
4.4. Value Chain Analysis
4.5. Market Risk Analysis
4.6. SWOT Analysis
4.7. Industry Trends and Emerging Technologies

5. Supply Side and Demand Side Indicators

6. Global Exterior Insulation and Finishing System (EIFS) Market Analysis and Forecast
6.1. Exterior Insulation and Finishing System (EIFS) Market Size & Y-o-Y Growth Analysis
6.1.1. North America
6.1.2. Europe
6.1.3. Asia Pacific
6.1.4. Middle East & Africa
6.1.5. South America

7. Global Exterior Insulation and Finishing System (EIFS) Market Analysis and Forecast, By Component
7.1. Introduction and Definition
7.2. Key Findings
7.3. Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Component
7.4. Exterior Insulation and Finishing System (EIFS) Market Size (US$ Mn) Forecast, By Component
7.5. Exterior Insulation and Finishing System (EIFS) Market Analysis, By Component
7.6. Exterior Insulation and Finishing System (EIFS) Market Attractiveness Analysis, By Component

8. Global Exterior Insulation and Finishing System (EIFS) Market Analysis and Forecast, By Product Type
8.1. Introduction and Definition
8.2. Key Findings
8.3. Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Product Type
8.4. Exterior Insulation and Finishing System (EIFS) Market Size (US$ Mn) Forecast, By Product Type
8.5. Exterior Insulation and Finishing System (EIFS) Market Analysis, By Product Type
8.6. Exterior Insulation and Finishing System (EIFS) Market Attractiveness Analysis, By Product Type

9. Global Exterior Insulation and Finishing System (EIFS) Market Analysis and Forecast, By End-Use
9.1. Introduction and Definition
9.2. Key Findings
9.3. Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By End-Use
9.4. Exterior Insulation and Finishing System (EIFS) Market Size (US$ Mn) Forecast, By End-Use
9.5. Exterior Insulation and Finishing System (EIFS) Market Analysis, By End-Use
9.6. Exterior Insulation and Finishing System (EIFS) Market Attractiveness Analysis, By End-Use

10. Global Exterior Insulation and Finishing System (EIFS) Market Analysis and Forecast, By Insulation Material
10.1. Introduction and Definition
10.2. Key Findings
10.3. Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Insulation Material
10.4. Exterior Insulation and Finishing System (EIFS) Market Size (US$ Mn) Forecast, By Insulation Material
10.5. Exterior Insulation and Finishing System (EIFS) Market Analysis, By Insulation Material
10.6. Exterior Insulation and Finishing System (EIFS) Market Attractiveness Analysis, By Insulation Material

11. Global Exterior Insulation and Finishing System (EIFS) Market Analysis, By Region
11.1. Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Region
11.2. Exterior Insulation and Finishing System (EIFS) Market Size (US$ Mn) Forecast, By Region
11.3. Exterior Insulation and Finishing System (EIFS) Market Attractiveness Analysis, By Region

12. North America Exterior Insulation and Finishing System (EIFS) Market Analysis
12.1. Key Findings
12.2. North America Exterior Insulation and Finishing System (EIFS) Market Overview
12.3. North America Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Component
12.4. North America Exterior Insulation and Finishing System (EIFS) Market Forecast, By Component
12.4.1. Adhesive
12.4.2. Insulation board
12.4.3. Base coat
12.4.4. Other
12.5. North America Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Product Type
12.6. North America Exterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
12.6.1. PB (Polymer-based)
12.6.2. PM (Polymer-modified)
12.7. North America Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By End-Use
12.8. North America Exterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
12.8.1. Residential
12.8.2. Non-residential
12.9. North America Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Insulation Material
12.10. North America Exterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
12.10.1. EPS (Expanded polystyrene)
12.10.2. MW (Mineral wool)
12.10.3. Other
12.11. North America Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Country
12.12. North America Exterior Insulation and Finishing System (EIFS) Market Forecast, By Country
12.12.1. U.S.
12.12.2. Canada
12.12.3. Mexico
12.13. North America Exterior Insulation and Finishing System (EIFS) Market Analysis, By Country
12.14. U.S. Exterior Insulation and Finishing System (EIFS) Market Forecast, By Component
12.14.1. Adhesive
12.14.2. Insulation board
12.14.3. Base coat
12.14.4. Other
12.15. U.S. Exterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
12.15.1. PB (Polymer-based)
12.15.2. PM (Polymer-modified)
12.16. U.S. Exterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
12.16.1. Residential
12.16.2. Non-residential
12.17. U.S.Exterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
12.17.1. EPS (Expanded polystyrene)
12.17.2. MW (Mineral wool)
12.17.3. Other
12.18. CanadaExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
12.18.1. Adhesive
12.18.2. Insulation board
12.18.3. Base coat
12.18.4. Other
12.19. CanadaExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
12.19.1. PB (Polymer-based)
12.19.2. PM (Polymer-modified)
12.20. CanadaExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
12.20.1. Residential
12.20.2. Non-residential
12.21. CanadaExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
12.21.1. EPS (Expanded polystyrene)
12.21.2. MW (Mineral wool)
12.21.3. Other
12.22. MexicoExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
12.22.1. Adhesive
12.22.2. Insulation board
12.22.3. Base coat
12.22.4. Other
12.23. MexicoExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
12.23.1. PB (Polymer-based)
12.23.2. PM (Polymer-modified)
12.24. MexicoExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
12.24.1. Residential
12.24.2. Non-residential
12.25. MexicoExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
12.25.1. EPS (Expanded polystyrene)
12.25.2. MW (Mineral wool)
12.25.3. Other
12.26. North America Exterior Insulation and Finishing System (EIFS) Market Attractiveness Analysis
12.26.1. By Component
12.26.2. By Product Type
12.26.3. By End-Use
12.26.4. By Insulation Material
12.27. PEST Analysis
12.28. Key Trends
12.29. Key Developments

13. Europe Exterior Insulation and Finishing System (EIFS) Market Analysis
13.1. Key Findings
13.2. Europe Exterior Insulation and Finishing System (EIFS) Market Overview
13.3. Europe Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Component
13.4. Europe Exterior Insulation and Finishing System (EIFS) Market Forecast, By Component
13.4.1. Adhesive
13.4.2. Insulation board
13.4.3. Base coat
13.4.4. Other
13.5. Europe Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Product Type
13.6. Europe Exterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
13.6.1. PB (Polymer-based)
13.6.2. PM (Polymer-modified)
13.7. Europe Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By End-Use
13.8. Europe Exterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
13.8.1. Residential
13.8.2. Non-residential
13.9. Europe Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Insulation Material
13.10. Europe Exterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
13.10.1. EPS (Expanded polystyrene)
13.10.2. MW (Mineral wool)
13.10.3. Other
13.11. Europe Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Country
13.12. Europe Exterior Insulation and Finishing System (EIFS) Market Forecast, By Country
13.12.1. Germany
13.12.2. U.K.
13.12.3. France
13.12.4. Italy
13.12.5. Spain
13.12.6. Sweden
13.12.7. CIS countries
13.12.8. Rest of Europe
13.13. GermanyExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
13.13.1. Adhesive
13.13.2. Insulation board
13.13.3. Base coat
13.13.4. Other
13.14. GermanyExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
13.14.1. PB (Polymer-based)
13.14.2. PM (Polymer-modified)
13.15. GermanyExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
13.15.1. Residential
13.15.2. Non-residential
13.16. GermanyExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
13.16.1. EPS (Expanded polystyrene)
13.16.2. MW (Mineral wool)
13.16.3. Other
13.17. U.K.Exterior Insulation and Finishing System (EIFS) Market Forecast, By Component
13.17.1. Adhesive
13.17.2. Insulation board
13.17.3. Base coat
13.17.4. Other
13.18. U.K. Exterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
13.18.1. PB (Polymer-based)
13.18.2. PM (Polymer-modified)
13.19. U.K. Exterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
13.19.1. Residential
13.19.2. Non-residential
13.20. U.K. Exterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
13.20.1. EPS (Expanded polystyrene)
13.20.2. MW (Mineral wool)
13.20.3. Other
13.21. FranceExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
13.21.1. Adhesive
13.21.2. Insulation board
13.21.3. Base coat
13.21.4. Other
13.22. FranceExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
13.22.1. PB (Polymer-based)
13.22.2. PM (Polymer-modified)
13.23. FranceExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
13.23.1. Residential
13.23.2. Non-residential
13.24. FranceExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
13.24.1. EPS (Expanded polystyrene)
13.24.2. MW (Mineral wool)
13.24.3. Other
13.25. ItalyExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
13.25.1. Adhesive
13.25.2. Insulation board
13.25.3. Base coat
13.25.4. Other
13.26. ItalyExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
13.26.1. PB (Polymer-based)
13.26.2. PM (Polymer-modified)
13.27. ItalyExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
13.27.1. Residential
13.27.2. Non-residential
13.28. ItalyExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
13.28.1. EPS (Expanded polystyrene)
13.28.2. MW (Mineral wool)
13.28.3. Other
13.29. SpainExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
13.29.1. Adhesive
13.29.2. Insulation board
13.29.3. Base coat
13.29.4. Other
13.30. SpainExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
13.30.1. PB (Polymer-based)
13.30.2. PM (Polymer-modified)
13.31. SpainExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
13.31.1. Residential
13.31.2. Non-residential
13.32. SpainExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
13.32.1. EPS (Expanded polystyrene)
13.32.2. MW (Mineral wool)
13.32.3. Other
13.33. SwedenExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
13.33.1. Adhesive
13.33.2. Insulation board
13.33.3. Base coat
13.33.4. Other
13.34. SwedenExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
13.34.1. PB (Polymer-based)
13.34.2. PM (Polymer-modified)
13.35. SwedenExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
13.35.1. Residential
13.35.2. Non-residential
13.36. SwedenExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
13.36.1. EPS (Expanded polystyrene)
13.36.2. MW (Mineral wool)
13.36.3. Other
13.37. CIS countriesExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
13.37.1. Adhesive
13.37.2. Insulation board
13.37.3. Base coat
13.37.4. Other
13.38. CIS countriesExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
13.38.1. PB (Polymer-based)
13.38.2. PM (Polymer-modified)
13.39. CIS countriesExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
13.39.1. Residential
13.39.2. Non-residential
13.40. CIS countriesExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
13.40.1. EPS (Expanded polystyrene)
13.40.2. MW (Mineral wool)
13.40.3. Other
13.41. Rest of EuropeExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
13.41.1. Adhesive
13.41.2. Insulation board
13.41.3. Base coat
13.41.4. Other
13.42. Rest of Europe Exterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
13.42.1. PB (Polymer-based)
13.42.2. PM (Polymer-modified)
13.43. Rest of Europe Exterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
13.43.1. Residential
13.43.2. Non-residential
13.44. Rest of Europe Exterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
13.44.1. EPS (Expanded polystyrene)
13.44.2. MW (Mineral wool)
13.44.3. Other
13.45. Europe Exterior Insulation and Finishing System (EIFS) Market Attractiveness Analysis
13.45.1. By Component
13.45.2. By Product Type
13.45.3. By End-Use
13.45.4. By Insulation Material
13.46. PEST Analysis
13.47. Key Trends
13.48. Key Developments

14. Asia Pacific Exterior Insulation and Finishing System (EIFS) Market Analysis
14.1. Key Findings
14.2. Asia Pacific Exterior Insulation and Finishing System (EIFS) Market Overview
14.3. Asia Pacific Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Component
14.4. Asia Pacific Exterior Insulation and Finishing System (EIFS) Market Forecast, By Component
14.4.1. Adhesive
14.4.2. Insulation board
14.4.3. Base coat
14.4.4. Other
14.5. Asia Pacific Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Product Type
14.6. Asia Pacific Exterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
14.6.1. PB (Polymer-based)
14.6.2. PM (Polymer-modified)
14.7. Asia Pacific Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By End-Use
14.8. Asia Pacific Exterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
14.8.1. Residential
14.8.2. Non-residential
14.9. Asia Pacific Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Insulation Material
14.10. Asia Pacific Exterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
14.10.1. EPS (Expanded polystyrene)
14.10.2. MW (Mineral wool)
14.10.3. Other
14.11. Asia Pacific Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Country
14.12. Asia Pacific Exterior Insulation and Finishing System (EIFS) Market Forecast, By Country
14.12.1. China
14.12.2. India
14.12.3. Japan
14.12.4. South Korea
14.12.5. Australia
14.12.6. ASEAN
14.12.7. Rest of Asia Pacific
14.13. ChinaExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
14.13.1. Adhesive
14.13.2. Insulation board
14.13.3. Base coat
14.13.4. Other
14.14. ChinaExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
14.14.1. PB (Polymer-based)
14.14.2. PM (Polymer-modified)
14.15. ChinaExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
14.15.1. Residential
14.15.2. Non-residential
14.16. ChinaExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
14.16.1. EPS (Expanded polystyrene)
14.16.2. MW (Mineral wool)
14.16.3. Other
14.17. IndiaExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
14.17.1. Adhesive
14.17.2. Insulation board
14.17.3. Base coat
14.17.4. Other
14.18. India Exterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
14.18.1. PB (Polymer-based)
14.18.2. PM (Polymer-modified)
14.19. India Exterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
14.19.1. Residential
14.19.2. Non-residential
14.20. India Exterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
14.20.1. EPS (Expanded polystyrene)
14.20.2. MW (Mineral wool)
14.20.3. Other
14.21. JapanExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
14.21.1. Adhesive
14.21.2. Insulation board
14.21.3. Base coat
14.21.4. Other
14.22. JapanExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
14.22.1. PB (Polymer-based)
14.22.2. PM (Polymer-modified)
14.23. JapanExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
14.23.1. Residential
14.23.2. Non-residential
14.24. JapanExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
14.24.1. EPS (Expanded polystyrene)
14.24.2. MW (Mineral wool)
14.24.3. Other
14.25. South KoreaExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
14.25.1. Adhesive
14.25.2. Insulation board
14.25.3. Base coat
14.25.4. Other
14.26. South KoreaExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
14.26.1. PB (Polymer-based)
14.26.2. PM (Polymer-modified)
14.27. South KoreaExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
14.27.1. Residential
14.27.2. Non-residential
14.28. South KoreaExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
14.28.1. EPS (Expanded polystyrene)
14.28.2. MW (Mineral wool)
14.28.3. Other
14.29. AustraliaExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
14.29.1. Adhesive
14.29.2. Insulation board
14.29.3. Base coat
14.29.4. Other
14.30. AustraliaExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
14.30.1. PB (Polymer-based)
14.30.2. PM (Polymer-modified)
14.31. AustraliaExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
14.31.1. Residential
14.31.2. Non-residential
14.32. AustraliaExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
14.32.1. EPS (Expanded polystyrene)
14.32.2. MW (Mineral wool)
14.32.3. Other
14.33. ASEAN Exterior Insulation and Finishing System (EIFS) Market Forecast, By Component
14.33.1. Adhesive
14.33.2. Insulation board
14.33.3. Base coat
14.33.4. Other
14.34. ASEAN Exterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
14.34.1. PB (Polymer-based)
14.34.2. PM (Polymer-modified)
14.35. ASEAN Exterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
14.35.1. Residential
14.35.2. Non-residential
14.36. ASEAN Exterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
14.36.1. EPS (Expanded polystyrene)
14.36.2. MW (Mineral wool)
14.36.3. Other
14.37. Rest of Asia Pacific Exterior Insulation and Finishing System (EIFS) Market Forecast, By Component
14.37.1. Adhesive
14.37.2. Insulation board
14.37.3. Base coat
14.37.4. Other
14.38. Rest of Asia Pacific Exterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
14.38.1. PB (Polymer-based)
14.38.2. PM (Polymer-modified)
14.39. Rest of Asia Pacific Exterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
14.39.1. Residential
14.39.2. Non-residential
14.40. Rest of Asia Pacific Exterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
14.40.1. EPS (Expanded polystyrene)
14.40.2. MW (Mineral wool)
14.40.3. Other
14.41. Asia Pacific Exterior Insulation and Finishing System (EIFS) Market Attractiveness Analysis
14.41.1. By Component
14.41.2. By Product Type
14.41.3. By End-Use
14.41.4. By Insulation Material
14.42. PEST Analysis
14.43. Key Trends
14.44. Key Developments

15. Middle East & Africa Exterior Insulation and Finishing System (EIFS) Market Analysis
15.1. Key Findings
15.2. Middle East & Africa Exterior Insulation and Finishing System (EIFS) Market Overview
15.3. Middle East & Africa Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Component
15.4. Middle East & Africa Exterior Insulation and Finishing System (EIFS) Market Forecast, By Component
15.4.1. Adhesive
15.4.2. Insulation board
15.4.3. Base coat
15.4.4. Other
15.5. Middle East & Africa Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Product Type
15.6. Middle East & Africa Exterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
15.6.1. PB (Polymer-based)
15.6.2. PM (Polymer-modified)
15.7. Middle East & Africa Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By End-Use
15.8. Middle East & Africa Exterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
15.8.1. Residential
15.8.2. Non-residential
15.9. Middle East & Africa Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Insulation Material
15.10. Middle East & Africa Exterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
15.10.1. EPS (Expanded polystyrene)
15.10.2. MW (Mineral wool)
15.10.3. Other
15.11. Middle East & Africa Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Country
15.12. Middle East & Africa Exterior Insulation and Finishing System (EIFS) Market Forecast, By Country
15.12.1. GCC countries
15.12.2. Nigeria
15.12.3. Egypt
15.12.4. South Africa
15.12.5. Rest of Middle East & Africa
15.13. GCC countriesExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
15.13.1. Adhesive
15.13.2. Insulation board
15.13.3. Base coat
15.13.4. Other
15.14. GCC countriesExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
15.14.1. PB (Polymer-based)
15.14.2. PM (Polymer-modified)
15.15. GCC countriesExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
15.15.1. Residential
15.15.2. Non-residential
15.16. GCC countriesExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
15.16.1. EPS (Expanded polystyrene)
15.16.2. MW (Mineral wool)
15.16.3. Other
15.17. NigeriaExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
15.17.1. Adhesive
15.17.2. Insulation board
15.17.3. Base coat
15.17.4. Other
15.18. NigeriaExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
15.18.1. PB (Polymer-based)
15.18.2. PM (Polymer-modified)
15.19. NigeriaExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
15.19.1. Residential
15.19.2. Non-residential
15.20. NigeriaExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
15.20.1. EPS (Expanded polystyrene)
15.20.2. MW (Mineral wool)
15.20.3. Other
15.21. South AfricaExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
15.21.1. Adhesive
15.21.2. Insulation board
15.21.3. Base coat
15.21.4. Other
15.22. South AfricaExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
15.22.1. PB (Polymer-based)
15.22.2. PM (Polymer-modified)
15.23. South AfricaExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
15.23.1. Residential
15.23.2. Non-residential
15.24. South AfricaExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
15.24.1. EPS (Expanded polystyrene)
15.24.2. MW (Mineral wool)
15.24.3. Other
15.25. Rest of Middle East & AfricaExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
15.25.1. Adhesive
15.25.2. Insulation board
15.25.3. Base coat
15.25.4. Other
15.26. Rest of Middle East & AfricaExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
15.26.1. PB (Polymer-based)
15.26.2. PM (Polymer-modified)
15.27. Rest of Middle East & AfricaExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
15.27.1. Residential
15.27.2. Non-residential
15.28. Rest of Middle East & AfricaExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
15.28.1. EPS (Expanded polystyrene)
15.28.2. MW (Mineral wool)
15.28.3. Other
15.29. Middle East & Africa Exterior Insulation and Finishing System (EIFS) Market Attractiveness Analysis
15.29.1. By Component
15.29.2. By Product Type
15.29.3. By End-Use
15.29.4. By Insulation Material
15.30. PEST Analysis
15.31. Key Trends
15.32. Key Developments

16. South America Exterior Insulation and Finishing System (EIFS) Market Analysis
16.1. Key Findings
16.2. South America Exterior Insulation and Finishing System (EIFS) Market Overview
16.3. South America Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Component
16.4. South America Exterior Insulation and Finishing System (EIFS) Market Forecast, By Component
16.4.1. Adhesive
16.4.2. Insulation board
16.4.3. Base coat
16.4.4. Other
16.5. South America Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Product Type
16.6. South America Exterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
16.6.1. PB (Polymer-based)
16.6.2. PM (Polymer-modified)
16.7. South America Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By End-Use
16.8. South America Exterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
16.8.1. Residential
16.8.2. Non-residential
16.9. South America Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Insulation Material
16.10. South America Exterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
16.10.1. EPS (Expanded polystyrene)
16.10.2. MW (Mineral wool)
16.10.3. Other
16.11. South America Exterior Insulation and Finishing System (EIFS) Market Value Share Analysis, By Country
16.12. South America Exterior Insulation and Finishing System (EIFS) Market Forecast, By Country
16.12.1. Brazil
16.12.2. Colombia
16.12.3. Argentina
16.12.4. Rest of South America
16.13. BrazilExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
16.13.1. Adhesive
16.13.2. Insulation board
16.13.3. Base coat
16.13.4. Other
16.14. BrazilExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
16.14.1. PB (Polymer-based)
16.14.2. PM (Polymer-modified)
16.15. BrazilExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
16.15.1. Residential
16.15.2. Non-residential
16.16. BrazilExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
16.16.1. EPS (Expanded polystyrene)
16.16.2. MW (Mineral wool)
16.16.3. Other
16.17. Argentina Exterior Insulation and Finishing System (EIFS) Market Forecast, By Component
16.17.1. Adhesive
16.17.2. Insulation board
16.17.3. Base coat
16.17.4. Other
16.18. Argentina Exterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
16.18.1. PB (Polymer-based)
16.18.2. PM (Polymer-modified)
16.19. Argentina Exterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
16.19.1. Residential
16.19.2. Non-residential
16.20. Argentina Exterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
16.20.1. EPS (Expanded polystyrene)
16.20.2. MW (Mineral wool)
16.20.3. Other
16.21. ColombiaExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
16.21.1. Adhesive
16.21.2. Insulation board
16.21.3. Base coat
16.21.4. Other
16.22. ColombiaExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
16.22.1. PB (Polymer-based)
16.22.2. PM (Polymer-modified)
16.23. ColombiaExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
16.23.1. Residential
16.23.2. Non-residential
16.24. ColombiaExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
16.24.1. EPS (Expanded polystyrene)
16.24.2. MW (Mineral wool)
16.24.3. Other
16.25. Rest of South AmericaExterior Insulation and Finishing System (EIFS) Market Forecast, By Component
16.25.1. Adhesive
16.25.2. Insulation board
16.25.3. Base coat
16.25.4. Other
16.26. Rest of South AmericaExterior Insulation and Finishing System (EIFS) Market Forecast, By Product Type
16.26.1. PB (Polymer-based)
16.26.2. PM (Polymer-modified)
16.27. Rest of South AmericaExterior Insulation and Finishing System (EIFS) Market Forecast, By End-Use
16.27.1. Residential
16.27.2. Non-residential
16.28. Rest of South AmericaExterior Insulation and Finishing System (EIFS) Market Forecast, By Insulation Material
16.28.1. EPS (Expanded polystyrene)
16.28.2. MW (Mineral wool)
16.28.3. Other
16.29. South AmericaExterior Insulation and Finishing System (EIFS) Market Attractiveness Analysis
16.29.1. By Component
16.29.2. By Product Type
16.29.3. By End-Use
16.29.4. By Insulation Material
16.30. PEST Analysis
16.31. Key Trends
16.32. Key Developments

17. Company Profiles
17.1. Market Share Analysis, By Company
17.2. Competition Matrix
17.2.1. Competitive Benchmarking of key players By price, presence, market share, Applications, and R&D investment
17.2.2. New Product Launches and Product Enhancements
17.2.3. Market Consolidation
17.2.3.1. M&A By Regions, Investment and Application
17.2.3.2. M&A Key Players, Forward Integration and BackwardIntegration
17.3. Company Profiles: Key Players
17.3.1. Lafargeholcim Ltd
17.3.1.1. Company Overview
17.3.1.2. Financial Overview
17.3.1.3. Product Portfolio
17.3.1.4. Business Strategy
17.3.1.5. Recent Developments
17.3.1.6. Development Footprint
17.3.2. RMAX
17.3.3. Saint-Gobain Weber
17.3.4. Dryvit Systems, Inc.
17.3.5. Aliva UK Ltd.
17.3.6. Sto Corp.
17.3.7. BASF Corporation
17.3.8. Parex USA, Inc.
17.3.9. The Dow Chemical Company
17.3.10. Other
  • INQUIRE BEFORE BUYING